SAAF Atlas Cheetah-C Clean

SAAF Atlas Cheetah-C Clean
 
 
Detailed 1-200 scale 3D printed Atlas Cheetah C jet representing the South African Air Force in a clean configuration.
 
 
Available Scales
1-200
1-300
 
 
Historical Context
The Atlas Cheetah-C was primarily used by the South African Air Force (SAAF) as its main fighter aircraft from 1992 until 2008. Following its retirement in South Africa, the variant was sold and utilized by the Ecuadorian Air Force and a private American defense contractor.
Operators and Operational History:
South African Air Force (SAAF): The Cheetah-C was the definitive single-seat combat variant developed by the Atlas Aircraft Corporation to counter Soviet-built aircraft like the MiG-23. It was operated exclusively by 2 Squadron (the "Flying Cheetahs") out of AFB Louis Trichardt (now Makhado). While the earlier Cheetah-D and E variants saw active deployment during the South African Border War, the Cheetah-C entered service just as that conflict ended, serving instead as South Africa's premier frontline deterrent during the 1990s and 2000s.
Ecuadorian Air Force: In 2010, Ecuador purchased 10 retired Cheetah-C models (along with two dual-seat Cheetah-Bs) from South Africa. They were used for air defense and ground attack missions to replace their aging Mirage F1 fleet.
Draken International: In 2017, this private U.S.-based defense contractor acquired 9 Cheetah-C airframes. They use the jets in the United States as "Red Air" adversary aircraft to simulate enemy forces during training exercises for U.S. military fighter pilots.
 
 
This is an ErikGen design. We are an approved printer for EriKGen designs. His exquisite STLs can be purchased and self printed here: EriKGen Designs
 
 
About Flight Deck Decals 3D Prints
Flight Deck Decals 3D prints are created for gamers and modelers who expect exquisite detail, highest quality, and models that are ready to paint and put on the table.
Most aircraft are available in 1-300, 1-285, 1-200, and 1-144 scales
Printed using Flight Deck Decals' premium proprietary resin, created specifically for miniature aircraft
Excellent paint and primer adhesion compared with many lower-cost resins
Produced on high-resolution 8K or greater resin printers for exceptional detail and smooth layer reproduction
Fine, crisp surface detail with clean panel lines and scale-appropriate features
Carefully printed and inspected with the same attention to detail that has defined Flight Deck Decals for more than 10 years
 
 
Built by a Life Long Gamer, for Gamers
Flight Deck Decals wasn't created by a manufacturer looking for another market to enter.
I'm a lifelong gamer and modeler who built the store I always wished existed.
For more than a decade, the goal has remained the same: provide fellow hobbyists with the highest-quality decals and 3D printed miniatures available.