MiG-17 F Fresco C Clean

MiG-17 F Fresco C Clean
 
 
Detailed 1-200 scale 3D printed jet representing the MiG-17 F Fresco C Clean configuration.
 
 
Available Scales
1-200
1-300
1-285 Print on Demand
1-144 Print on Demand
 
 
Historical Context
The Mikoyan-Gurevich MiG-17 was a Soviet transonic fighter developed from the MiG-15 to provide better high-speed handling, improved stability, and stronger performance near the sound barrier. The prototype first flew in 1950, and the type entered Soviet service in the early 1950s.
Although outwardly similar to the MiG-15, the MiG-17 introduced a revised wing with increased sweep and aerodynamic refinements. Later variants added afterburning engines and radar, turning the type into a capable day fighter and interceptor.
Key Aspects of the MiG-17 History:
Development and Origin: Created as a refined MiG-15 successor, the MiG-17 used a new wing, improved tail surfaces, and later the afterburning VK-1F engine. Radar-equipped MiG-17P/PF versions expanded the all-weather interception role.
Military and Combat Operations:
Vietnam War: North Vietnamese MiG-17s became famous for close-range dogfighting against faster U.S. aircraft, exploiting maneuverability and cannon armament.
Middle East and Africa: The type also served in Arab-Israeli conflicts and numerous regional wars.
Foreign Operators: Widely exported and produced under license, including the Chinese J-5 and Polish Lim-series aircraft.
Upgrades and Retirement: Later MiG-17 variants added afterburners, radar, and missile capability, but the type was gradually replaced by supersonic fighters such as the MiG-19 and MiG-21.
Design and Armament: Single-seat swept-wing fighter normally armed with one 37 mm and two 23 mm cannon, with pylons for bombs, rockets, tanks, and on some variants air-to-air missiles.
The MiG-17 became one of the Cold War's most widely distributed fighters and remained operational in some countries long after leaving Soviet frontline service.
 
 
This is an ErikGen design. We are an approved printer for EriKGen designs. His exquisite STLs can be purchased and self printed here: EriKGen Designs
 
 
About Flight Deck Decals 3D Prints
Flight Deck Decals 3D prints are created for gamers and modelers who expect exquisite detail, highest quality, and models that are ready to paint and put on the table.
Most aircraft are available in 1-300, 1-285, 1-200, and 1-144 scales
Printed using Flight Deck Decals' premium proprietary resin, created specifically for miniature aircraft
Excellent paint and primer adhesion compared with many lower-cost resins
Produced on high-resolution 8K or greater resin printers for exceptional detail and smooth layer reproduction
Fine, crisp surface detail with clean panel lines and scale-appropriate features
Carefully printed and inspected with the same attention to detail that has defined Flight Deck Decals for more than 10 years
 
 
Built by a Life Long Gamer, for Gamers
Flight Deck Decals wasn't created by a manufacturer looking for another market to enter.
I'm a lifelong gamer and modeler who built the store I always wished existed.
For more than a decade, the goal has remained the same: provide fellow hobbyists with the highest-quality decals and 3D printed miniatures available.