top of page
F-100F Super Sabre 3D aircraft miniature, available in 1-300, 1-285, 1-200 and 1-144 scales

F-100F Super Sabre

From $4.70Sale Price
F-100F Super Sabre
 
 
Detailed 1-200 scale 3D printed jet representing the F-100F Super Sabre in the configuration shown.
 
 
Available Scales
  • 1-200
  • 1-300
  • 1-285 Print on Demand
  • 1-144 Print on Demand
 
 
Historical Context
Please note: 1-200 & 1-144 scale prints will receive 3 fuel probes. We do not ship probes for 1-300 or 1-285 scale prints. The are just too small, thin, and break easily. I use a bristle from a brush for my models as they are much more flexible. For 1-200 scale I use a "cut to length" piece of jewelry brass/copper wire from the craft store. 
The F-100F Super Sabre, a two-seat variant of the "Hun," was used extensively by the U.S. Air Force in Southeast Asia (Vietnam, Thailand, and Laos) between 1964-1971 for specialized roles. Key roles included "Wild Weasel" radar suppression, "Misty" Fast Forward Air Controller (FAC) missions, and two-seat pilot training. 
Key Operational Areas and Roles:
  • Vietnam and Southeast Asia (1964–1971):
    • Wild Weasel (SAM Suppression): F-100Fs were the first to fly anti-SAM missions (codenamed "Iron Hand") to detect and destroy enemy radar/missile sites in North Vietnam.
    • Misty Fast Forward Air Controller (FAC): Operating from bases in South Vietnam (Phu Cat and Tuy Hoa), F-100Fs were used as fast-moving FACs to locate and mark targets for other strike aircraft in Laos and North Vietnam.
    • Close Air Support: They flew thousands of missions supporting ground troops in South Vietnam.
  • Other Uses:
    • Training: Served as a two-seat trainer for pilots transitioning to the F-100D fighter-bomber.
    • Air National Guard: Operated by ANG units until 1979.
    • International Operators: France, Denmark, Turkey, and Taiwan utilized the F-100 series, with Turkish F-100s seeing action in the 1974 Cyprus conflict. 
      National Museum of the USAF (.mil) +6
The F-100F, known as a reliable and versatile trainer-fighter, was popular for its dual-seat configuration allowing for specialized, highly dangerous missions that single-seat fighters could not perform as effectively. 
 
 
This is an ErikGen design. We are an approved printer for EriKGen designs. His exquisite STLs can be purchased and self printed here: EriKGen Designs
 
 
About Flight Deck Decals 3D Prints
Flight Deck Decals 3D prints are created for gamers and modelers who expect exquisite detail, highest quality, and models that are ready to paint and put on the table.
  • Most aircraft are available in 1-300, 1-285, 1-200, and 1-144 scales
  • Printed using Flight Deck Decals' premium proprietary resin, created specifically for miniature aircraft
  • Excellent paint and primer adhesion compared with many lower-cost resins
  • Produced on high-resolution 8K or greater resin printers for exceptional detail and smooth layer reproduction
  • Fine, crisp surface detail with clean panel lines and scale-appropriate features
  • Carefully printed and inspected with the same attention to detail that has defined Flight Deck Decals for more than 10 years
 
 
Built by a Life Long Gamer, for Gamers
Flight Deck Decals wasn't created by a manufacturer looking for another market to enter. I'm a lifelong gamer and modeler who built the store I always wished existed.
For more than a decade, the goal has remained the same: provide fellow hobbyists with the highest-quality decals and 3D printed miniatures available.
Quantity
No Reviews YetShare your thoughts. Be the first to leave a review.
bottom of page