B-1B Lancer
This is a Flight Deck Decals exclusive model.
The STL file which you can print on your own is available here "STL Link"
The B-1B Lancer has been used extensively as a conventional heavy bomber in major U.S. military campaigns since 1998, with significant roles in Iraq, Yugoslavia (Kosovo), Afghanistan, Libya, and Syria. It acts as a long-range, high-payload strike aircraft, often providing close air support and precision bombing, notably in operations like Desert Fox, Allied Force, Enduring Freedom, and Iraqi Freedom.
Major Combat Operations and Deployments
Iraq (Desert Fox 1998, Iraqi Freedom 2003–2010s): Performed extensive bombing missions, delivering a large percentage of joint direct attack munitions (JDAMs).
Yugoslavia (Allied Force 1999): Six B-1Bs flew less than 2% of combat sorties but delivered over 20% of the total ordnance.
Afghanistan (Enduring Freedom 2001–2010s): Supported ground forces with close air support, at times delivering 40% of the total tonnage.
Libya & Syria (2011–2018): Used in intervention operations, including 2018 strikes targeting chemical weapons facilities.
Iran/Middle East (2025–2026): Deployed to the UK and Middle East for strikes against regional targets, with recent sorties originating from the U.S. for long-range strike missions.
Key Operational Capabilities
Massive Payload: Known for its high-volume, precision-guided weapon delivery, often referred to as a "heavy hammer".
Long-Range Strike: Regularly flies long-duration, non-stop missions from its home base at Ellsworth Air Force Base, SD to targets in the Middle East, showcasing its reach and "loiter time".
Modernization: As of 2025–2026, the Air Force operates 45 B-1B bombers for conventional, standoff weapons capability until the full arrival of the B-21.
Available Scales
1-200
1-300
1-285 Print on Demand
About Flight Deck Decals 3D Prints
Flight Deck Decals 3D prints are created for gamers and modelers who expect exquisite detail, highest quality, and models that are ready to paint and put on the table.
Most aircraft are available in 1-300, 1-285, 1-200, and 1-144 scales
Printed using Flight Deck Decals' premium proprietary resin, created specifically for miniature aircraft
Excellent paint and primer adhesion compared with many lower-cost resins
Produced on high-resolution 8K or greater resin printers for exceptional detail and smooth layer reproduction
Fine, crisp surface detail with clean panel lines and scale-appropriate features
Carefully printed and inspected with the same attention to detail that has defined Flight Deck Decals for more than 10 years
Built by a Life Long Gamer, for Gamers
Flight Deck Decals wasn't created by a manufacturer looking for another market to enter. I'm a lifelong gamer and modeler who built the store I always wished existed.
For more than a decade, the goal has remained the same: provide fellow hobbyists with the highest-quality decals and 3D printed miniatures available.
