A-4F Skyhawk with Drop Tanks

A-4F Skyhawk with Drop Tanks
 
 
Detailed 1-200 scale 3D printed jet representing the A-4F Skyhawk with Drop Tanks configuration shown in this listing.
 
 
Available Scales
1-200
1-300
1-285 Print on Demand
1-144 Print on Demand
 
 
Please note: 1-200 & 1-144 scale prints will receive 3 fuel probes. We do not ship probes for 1-300 or 1-285 scale prints. The are just too small, thin, and break easily. I use a bristle from a brush for my models as they are much more flexible. for 1-200 scale I use a "cut to length" piece of jewelry brass/copper wire from the craft store.
Please note: 1-200 & 1-144 scale prints will receive 3 fuel probes. We do not ship probes for 1-300 or 1-285 scale prints. They are just too small, thin, and break easily. I use a brush bristle for my models as they are much more flexible. for 1-200 scale I use a "cut to length" piece of jewelry brass/copper 26 gauge wire from the craft store.
 
 
Historical Context
The A-4F Skyhawk was used primarily by the U.S. Navy as a carrier-based light-attack aircraft, beginning in 1967, and was designed specifically for close air support and ground attack roles during the Vietnam War.
Key operational details of the A-4F include:
Vietnam War: Served with Pacific Fleet squadrons, heavily armored for protection against ground fire.
U.S. Navy: Served as a primary attack aircraft through the late 1960s and 1970s before being replaced.
Upgrades: Featured a distinctive "hump" for electronics and a more powerful engine compared to previous models.
 
 
This is an ErikGen design. We are an approved printer for EriKGen designs. His exquisite STLs can be purchased and self printed here: EriKGen Designs
 
 
About Flight Deck Decals 3D Prints
Flight Deck Decals 3D prints are created for gamers and modelers who expect exquisite detail, highest quality, and models that are ready to paint and put on the table.
Most aircraft are available in 1-300, 1-285, 1-200, and 1-144 scales
Printed using Flight Deck Decals' premium proprietary resin, created specifically for miniature aircraft
Excellent paint and primer adhesion compared with many lower-cost resins
Produced on high-resolution 8K or greater resin printers for exceptional detail and smooth layer reproduction
Fine, crisp surface detail with clean panel lines and scale-appropriate features
Carefully printed and inspected with the same attention to detail that has defined Flight Deck Decals for more than 10 years
 
 
Built by a Life Long Gamer, for Gamers
Flight Deck Decals wasn't created by a manufacturer looking for another market to enter. I'm a lifelong gamer and modeler who built the store I always wished existed.
For more than a decade, the goal has remained the same: provide fellow hobbyists with the highest-quality decals and 3D printed miniatures available.